新闻资讯

防撞墙模具的正确加工步骤

2020-01-21 17:42:31

防撞墙模具主要是在公路上作为现浇使用,因为通过模具制作出来的防撞墙尺寸更为标准,而且采用模具进行制作的话,使用起来更加的就简单,因为模具的结构并不是很复杂的一种,整体就是分为了直板与弯板两块,在生产之前要准备好充足的施工材料,接下来就是对于模具的正常使用。那么在进行加工之前通常都要做好防撞墙模具的准备工作,因为只有这样才能够保证明模具的顺利使用,现浇生产非常明显的一个特点就是生产效率高,而且模具能够得到更好的使用,在加工时一般都是在公路上进行整个模具拼接,防撞墙模具的特点就是可以根据要求来进行延长。因为防撞墙是需要根据公路的走向来进行生产的,像普通公路与高速公路等都会使用到,这种模具进行生产能力强,而混凝土提前进行搅拌的话就可以来进行注浆了,模具组装完成后刷油,就可以开始浇筑泥浆了,整套生产流程非常的简单分为了灌浆、振动还有脱模三个部分,只要按照标准的方式进行制作,就能够生产出要求的防撞墙。

The anti-collision wall mold is mainly used as cast-in-place on the highway, because the size of the anti-collision wall made by the mold is more standard, and if the mold is used for making, it is more simple to use, because the structure of the mold is not a very complex one, the whole is divided into two parts: straight plate and bending plate. Before production, sufficient construction materials should be prepared. Next Is for the normal use of the mold. Before processing, the preparation work of the anti-collision wall mold should be done well, because only in this way can the smooth use of the open mold be ensured. The obvious feature of cast-in-place production is high production efficiency, and the mold can be better used. During processing, the whole mold is generally spliced on the road. The feature of the anti-collision wall mold is that it can be based on the Ask for an extension. Because the anti-collision wall needs to be produced according to the direction of the road, such as ordinary roads and expressways. This kind of mold has strong production capacity, and the concrete can be grouted if it is mixed in advance. After the mold is assembled, it can be painted with oil to start pouring mud. The whole production process is very simple, including grouting, vibration and desquamation The three parts of the mould can produce the required anti-collision wall as long as they are made in a standard way.

防撞墙模具使用的时候都是要来进行组装的,这样能够让整个模具更好的进行使用,整个模具构造简单,在拼接的时候要根据施工的要求进行一些长度的延长,或者是调节顶部的拉杆做出加宽的处理都是可以的,因为模板是主要的加工工具,在使用的时候就要做按照要求来进行使用。整个高速防撞墙模板组装时要使用卡扣先行进行固定,调整一些摆放的角度与位置,之后再去使用到螺栓为模具进行固定,这样才能够保证模具组装完成后的密封问题,在刷上油之后就可以浇筑泥浆了,整个生产过程中高速防撞墙模板是不能够去移动或者是做其他处理的,必须按照正确的加工步骤来生产,这样才能够保证生产出来的防撞墙是合格的。震动棒可以拆入到泥浆中,在震动的时候进行位置的调整,泥浆表面也要使用刮刀进行抹平,之后晾晒的时候不可以出触碰泥浆的表面。在泥浆凝固后将模板拆开,然后进行清洗,工人就可以来进行防撞墙的加固与保护了,而模具则是可以循环使用。

The anti-collision wall mold should be assembled when it is used, so that the whole mold can be used better. The whole mold structure is simple. When splicing, it is necessary to extend the length according to the construction requirements, or adjust the top pull rod to make widening. Because the template is the main processing tool, it is necessary to do the following when using Use as required. During the assembly of the whole high-speed anti-collision wall formwork, the buce shall be used to fix it first, adjust the angle and position of some places, and then use the bolt to fix the mold, so as to ensure the sealing problem after the mold assembly is completed. After the oil is applied, the slurry can be poured. During the whole production process, the high-speed anti-collision wall formwork cannot move or do other things Processing, must follow the correct processing steps to produce, so as to ensure that the produced anti-collision wall is qualified. The vibrator can be removed into the mud, and the position shall be adjusted during vibration. The mud surface shall also be trowelled with a scraper, and the mud surface shall not be touched during drying. After the mud solidifies, the formwork is disassembled and cleaned, so that the workers can reinforce and protect the anti-collision wall, and the formwork can be recycled.

联系方式
ico04
联系人

边经理

ico01
电话

0312-8103818

ico06
手机

18803129528

ico05
QQ

107108222

ico03
邮箱

925474963@qq.com

ico02
地址

河北省保定市清苑区阎庄乡高庄村