新闻资讯

防撞墙模板的具体操作步骤

2020-01-14 17:57:45

防撞墙模板的生产一般都是以按图定制为标准,因为在防撞墙的制作上,选择的生产模式全部是以现场浇筑,所以防撞墙模板的定制都是以单片式结构,两片组装在一起组成防撞墙的模型。防撞墙模板生产原理是以钢模具加工技术为主,采用电焊机制作的样式,从过去定制的模板外形来看,大部分是在道路两侧使用,所以结构为直板、弧形板样式,而中央使用的防撞墙采用的是两侧都是弧形板的样式,所以根据使用内容的不同,模板的制作内容也在发生改变

Generally, the production of the anti-collision wall formwork is based on the customization according to the drawings. Because in the production of the anti-collision wall, the production mode selected is all cast-in-situ, so the customization of the anti-collision wall formwork is a monolithic structure, and two pieces are assembled together to form the model of the anti-collision wall. The production principle of anti-collision wall formwork is mainly based on the steel mold processing technology, using the pattern made by electric welding machine. From the past customized template shape, most of them are used on both sides of the road, so the structure is straight plate and arc plate pattern, while the anti-collision wall used in the center is arc plate pattern on both sides, so according to the different use content, the template production content is also in Change

防撞墙模板需要依据图纸给出的具体数据,比如长度、宽度、高度以及内部的R度数等,这些数据是生产正确模具的关键所在,在确定好尺寸规格后,需要使用电脑绘图,然后通过电脑绘图传输给数控机床进行批量下料工作;其次是对于面板和筋板的整合,因为整套模具的质量与钢板厚度、工人焊接技术有直接关系,而生产成本的高低与板材的选用标准有直接关系,长度1米的大部分是采用3个厚面板、5*5筋板制作的,这样就形成了生产1米长防撞墙模板的固定模式,而筋板的条数也是与模具长度有直接关系的;组装模具,根据模具长度大小,组装的形式不同,尤其是上下固定的拉杆数量不同;生产好以后就需要对模具进行打包作业了,根据施工单位距离的长短,选择不同的打包方式,有木箱包装、普通打包带打包等等。

The anti-collision wall formwork shall be based on the specific data given in the drawings, such as length, width, height and internal R degree. These data are the key to produce the correct mold. After the size and specification are determined, the computer drawing shall be used, and then the computer drawing shall be transmitted to the numerical control machine tool for batch cutting; secondly, the integration of the panel and the rib plate is required, because the whole set The quality of the die is directly related to the thickness of the steel plate and the welding technology of the workers, while the level of the production cost is directly related to the selection standard of the plate. Most of the 1-meter-long die is made of 3 thick panels and 5 * 5 rib plates, which forms the fixed mode of producing the 1-meter-long anti-collision wall formwork, and the number of rib plates is also directly related to the length of the die. To assemble the die, according to the The length and size of the mold and the form of assembly are different, especially the number of the upper and lower fixed pull rods. After the production is finished, the mold needs to be packed. According to the distance of the construction unit, different packing methods are selected, such as wooden box packing, ordinary packing belt packing, etc.

联系方式
ico04
联系人

边经理

ico01
电话

0312-8103818

ico06
手机

18803129528

ico05
QQ

107108222

ico03
邮箱

925474963@qq.com

ico02
地址

河北省保定市清苑区阎庄乡高庄村